Aether Theory and Observations
Involving Ultra Low Frequency Waves



Tony Devencenzi
frostalarm@att.net
Website Founded 2009-08-27
Last Revision 2020-11-07

2020 Research

Page 2 of 12

Previous Page

Next Page

ULF-CP SENSOR

Capacitor Tests, Group 1 Polystyrene Capacitors:

_______________________________________________________

- Model number: EFCON PH-2203 2C-S-Y / TD96655-B

- Make or country of manufacture / Date of manufacture: Electronic Fabricators Inc / USA /1957

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Tubular, Axial 1-7/8 in Long X 3/4 in Dia

- Capacitance value: 0.22 uF (220 nF)

- Rated Tolerance: 1%

- Working Voltage rating: 200V

- Dissipation Factor: 133 PPM (.0001)

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 400 mV Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 750 mV Pk-Pk

- Comments on observed waveform quality or other notable behavior: Very low noise. Very nice waves.

_______________________________________________________

- Model number: K71-4B

- Make or country of manufacture / Date of manufacture: Russia / 9202

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Tubular, Axial 48 mm Long X 12 mm Dia

- Capacitance value: 0.27 uF / (270 nF)

- Rated Tolerance: 5%

- Working Voltage rating: 250V

- Dissipation Factor: 60 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 400 mV Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 600 mV Pk-Pk

- Comments on observed waveform quality or other notable behavior: Very good wave if used in higher output terminal connection

_______________________________________________________

- Model number: K71-4

- Make or country of manufacture / Date of manufacture: Russia / 0385

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Tubular, Axial 48 mm Long X 18 mm Dia

- Capacitance value: 0.68 uF (68 nF)

- Rated Tolerance: 5%

- Working Voltage rating: 250V

- Dissipation Factor: 109 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 400 mV Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 750 mV Pk-Pk

- Comments on observed waveform quality or other notable behavior: Ok wave, little noisy.

_______________________________________________________

- Model number: K71-4

- Make or country of manufacture / Date of manufacture: Russia / 0177

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Tubular, Axial 48 mm Long X 22 mm Dia

- Capacitance value: 1 uF

- Rated Tolerance: 10%

- Working Voltage rating: 250V

- Dissipation Factor: 104 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 300 mV Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 750 mV Pk-Pk

- Comments on observed waveform quality or other notable behavior: Good waves in higher output connection.

_______________________________________________________

- Model number: TC-297

- Make or country of manufacture / Date of manufacture: Czech Republic / No date

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Square, 29 mm H X 29 mm W X 25 mm D

- Capacitance value: 0.138 uF (138 nF)

- Rated Tolerance: 2%

- Working Voltage rating: 250V

- Dissipation Factor: 290 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 1 V Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 250 mV Pk-PK

-Comments on observed waveform quality or other notable behavior: Very nice waveforms.

_______________________________________________________

- Model number: MPGO

- Make or country of manufacture / Date of manufacture: Russia / 0388

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Square 30 mm H X 30 mm W X 25 mm D

- Capacitance value: 0.1 uF (100 nF)

- Rated Tolerance: 2%

- Working Voltage rating: 500V

- Dissipation Factor: 290 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 500 mV Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 600 mV Pk-Pk

- Comments on observed waveform quality or other notable behavior: Very nice waves.

_______________________________________________________

- Model number: MPGO

- Make or country of manufacture / Date of manufacture: Russia / 9102

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Square 30 mm H X 30 mm W X 25 mm D

- Capacitance value: 0.2 uF (200 nF)

- Rated Tolerance: 10%

- Working Voltage rating: 250V

- Dissipation Factor: 120 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 500 mV Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 700 mV Pk-Pk

-Comments on observed waveform quality or other notable behavior: Very clean waveform.

_______________________________________________________

- Model number: MPG-P

- Make or country of manufacture / Date of manufacture: Russia / 8801

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Square 50 mm H X 45 mm W X 60 mm D

- Capacitance value: 0.5 uF (500 nF)

- Rated Tolerance: 10%

- Working Voltage rating: 250V

- Dissipation Factor: 150 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 500 mV Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 1.3 V Pk-Pk

- Comments on observed waveform quality or other notable behavior: Very nice waves.

_______________________________________________________

- Model number: MPGO

- Make or country of manufacture / Date of manufacture: Russia / 9008

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Square 50 mm H X 45 mm W X 30 mm D

- Capacitance value: 1 uF

- Rated Tolerance: 2%

- Working Voltage rating: 250V

- Dissipation Factor: 170 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 500 mV Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 1 V Pk-Pk

- Comments on observed waveform quality or other notable behavior: Good wave in higher output connection.

_______________________________________________________

- Model number: MPG-P

- Make or country of manufacture / Date of manufacture: Russia / 0384

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Square 73 mm H X 65 mm W X 80 mm D

- Capacitance value: 2 uF

- Rated Tolerance: 1%

- Working Voltage rating: 250V

- Dissipation Factor: 160 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 1.2 V Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 1.5 V Pk-Pk

- Comments on observed waveform quality or other notable behavior: Very nice waveforms.

_______________________________________________________

- Model number: MPGO

- Make or country of manufacture / Date of manufacture: Russia / 1181

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Square 73 mm H X 65 mm W X 45 mm D

- Capacitance value: 4 uF

- Rated Tolerance: 5%

- Working Voltage rating: 160V

- Dissipation Factor: 360 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 1 V Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 1.6 V Pk-Pk

- Comments on observed waveform quality or other notable behavior: Good wave, little noise but not bad.

_______________________________________________________

- Model number: MPGO

- Make or country of manufacture / Date of manufacture: Russia / 9105

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Square 73 mm H X 65 mm W X 80 mm D

- Capacitance value: 8 uF

- Rated Tolerance: 5%

- Working Voltage rating: 160V

- Dissipation Factor: 650 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 2.2 V Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 800 mV Pk-Pk

- Comments on observed waveform quality or other notable behavior: Very good wave with higher output connection.

_______________________________________________________

- Model number: TC296 5M

- Make or country of manufacture / Date of manufacture: Czech Republic / no date

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Square 100 mm H X 60 mm W X 75 mm D

- Capacitance value: 5uF

- Rated Tolerance: 1%

- Working Voltage rating: 160V

- Dissipation Factor: 1340 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 2.2 V Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 200 mV Pk-Pk

- Comments on observed waveform quality or other notable behavior: Extreme difference in outputs with different connections. but wave is full of large spikes and distortions. Not suitable for sensor use.

_______________________________________________________

- Model number: K71-4B

- Make or country of manufacture / Date of manufacture: Russia / 9105

- Dielectric type: Polystyrene

- Casing material (M=Metallic / NM=Non-Metallic): M

- Shape and Physical size: Tubular, Axial 85 mm Long X 45 mm Dia

- Capacitance value: 10 uF

- Rated Tolerance: 2%

- Working Voltage rating: 160V

- Dissipation Factor: 190 PPM

- Sensor Circuit Output Voltage in each of two connection configurations:

Terminal 1=Input / Terminal 2= Floating Ground: 300 mV Pk-Pk

Terminal 2=Input / Terminal 1= Floating Ground: 1.2 V Pk-Pk

- Comments on observed waveform quality or other notable behavior: A little noise pickup or distortion. May be more accurate than the .1 uF FT-3 Standard.

_______________________________________________________





Efcon PH-203 2CY-S-Y / TD96655-B (USA) .22 uF / 200V Polystyrene





Russian Polystyrene Capacitors:

Top Row- Left to Right MPG-P 2 uF / 250V, MPGO 4 uF / 160V, MPGO 8 uF / 160V, TC296 5M (Czech Republic) 5 uF / 160V, K71-4B 10 uF / 160V

Bottom Row- Left to Right K71-4B .27 uF / 250V, K71-4 .68 uF / 250V, K71-4 1 uF / 250V, TC-297 (Czech Republic) .138 uF / 250V , MPGO .1 uF / 500V, MPGO .2 uF / 250V, MPG-P .5 uF / 250V, MPGO 1 uF / 250V






Polystyrene Capacitors, Test 1:
Chan 1= Red = FT-3 Teflon .1 uF / 600V Standard
Chan 2= Black = TC297 Polystyrene .138 uF / 250V
Chan 3 = Blue = Efcon PH2203 Polystyrene .22 uF / 200V
Chan 4= Green = MPG-P Polystyrene .5 uF / 250V






Polystyrene Capacitors, Test 2:
Chan 1= Red = FT-3 Teflon .1 uF / 600V Standard
Chan 2= Black = MPGO Polystyrene 1 uF / 250V
Chan 3 = Blue = MPG-P Polystyrene 2 uF / 250V
Chan 4= Green = MPGO Polystyrene 4 uF / 160V






Polystyrene Capacitors, Test 3:
Chan 1= Red = FT-3 Teflon .1 uF / 600V Standard
Chan 2= Black = TC296 Polystyrene 5 uF / 160V
Chan 3 = Blue = MPGO Polystyrene 8 uF / 160V
Chan 4= Green = K71-4B Polystyrene 10 uF / 160V


Summary: Most of the polystyrene capacitors tested as sensors, worked very well. All of the capacitors in test 1 worked very well. Nice clean waveforms. These lower microfarad falues of polystyrene capacitors seem to have good wave detection and greater noise immunity. The MPGO 4 uF seems a little noisy compared with the other capacitors of test 2. The TC296 5 uF capacitor in test 3 is very noisy and distorted and would not be a good choice.



Page 2 of 12

Previous Page

Next Page


www.aetherwavetheory.com